- Support FDD-LTE pilot test and CW test in 700MHz to 2700MHz frequency range.
- Transmitter power adjustment range: 0-43dBm, with the step of 0.5dB. In CW mode, output power and frequency can be set; In FDD-LTE pilot mode, output power, frequency, PCI, BW can be set, CP can be select.
- The power, frequency and other parameters can be remotely set via Transmitter control APP. The instrument is easy to operate and carry, with the effective operating distance of 10m, avoiding radiation injury resulting from high-power transmission.
- Receiver output RSSI for CW test; output frequency, PCI, RSRP, CINR, RSSI and other parameters for LTE pilot test.
- Android OS, 720p high resolution multi-touch screen.
- Support manually pointing the test location on map, directly shows the test trace in test APP. Support various map format (.jpg, .bmp, etc.).
- Receiver support 6 hours operating time after full charging.
- Support data replay and analysis. Result can be displayed in table, chart, test trace and other forms.
- Save test results in real time. More than 3GB usable internal storage.
Portable solution for Indoor DAS coverage Simulation
All the instruments and accessories in Feeler2 portable DAS coverage simulation test kit can be carry in one suitcase. And the set up can be done with one staff minimum.
As a simulating signal source, Pilot Transmitter in the kit is able to output FDD-LTE modulation signals. The cell signal parameters (Channel, PCI, RSRP, RSRQ, SINR, etc.) are collected by the receiver by means of walk test, and the actual coverage of the base station is simulated to estimate the coverage of base station signals, further confirm the locations and quantity of base stations and provide accurate data for the layout of indoor distribution system.
Support CW analysis for propagation model tuning
AsAs a simulating signal source, pilot Transmitter in test kit is able to output CW signals within 700MHz to 2700MHz. The CW signal strength are collected by the receiver with its spectrum analyzing function.
APP remote control and simple deployment
The Transmitter is a kind of engineering test instrument, which should be easy to deploy and operate for tests in various scenes. Pilot Transmitter in test kit is controlled by APP via Wi-Fi within 10m, facilitating remote operation and avoiding radiation injury caused by radio waves in high-power transmission of signals.
User-friendly Android operating system
Receiver in the kit is based on Android OS. It can be operated as same as a regular mobile phone. Even inexperienced user can easily obtain test results after simple training.
- Parameters can be set rapidly by clicking and sliding.
- Test results can be display and output in various format.
RF Features |
|
Frequency range |
Pilot mode: 700MHz to 2700MHz Spectrum analysis: 10MHz to 4200MHz |
Modulation & demodulation |
FDD-LTE |
Frequency step |
10KHz |
Sensitivity |
-110dBm (RSRP) |
FDD-LTE channel bandwidth |
20MHz |
DANL |
-168dBm/Hz Span set to 50kHz, Ref set to -100dBm, all other settings auto-coupled, 23±5℃. Normalized to 1 Hz RBW. |
Phase noise |
-96dBc/Hz, @10KHz, center frequency set to 1GHz |
Maximum safe input level |
+30dBm |
Sampling speed |
≤2s |
Transmitter output power |
0dBm to 43dBm (20W) |
Power step |
0.5dB |
Power accuracy |
Typical: ±1dB Max: ±1.5dB |
Out-of-band Spurious |
≤-50dBc (beyond the operating frequency of 200kHz) |
Second Harmonic |
≤-15dBc (typical) |
General |
|
Receiver OS |
Android |
Test port connectors |
Transmitter: N type, female,50 oHm Receiver: N type, female,50 oHm |
Communication Interface |
Transmitter: Wi-Fi Receiver: USB type C, Bluetooth, Wi-Fi |
Dimension |
Transmitter: 200 x 110 x 230 (mm) Receiver: 200 x 99 x 67 (mm) |
Weight |
Transmitter: 4.5kg Receiver: 1.25kg |
Operating time |
6 hours |
Power supply |
Transmitter: 220V AC; 28V DC; max power consumption: 140W Receiver: Slim Tip, DC20V/4.5A |
Environmental |
Operating Temperature: 0°C to 50°C Storage Temperature: -20°C to 70°C |
Battery |
Li-on type |
Model |
Description |
BB-TX |
BlueBat Transmitter |
BB-RX |
BlueBat Receiver |
Accessories Model |
Description |
BB-AS001 |
Receiver power adapter |
BB-AS002 |
Receiver Power cable (China standard) |
BB-AS003 |
Receiver Power cable (UK standard) |
BB-AS004 |
Receiver Power cable (EU standard) |
BB-AS005 |
Receiver Power cable (US standard) |
BB-AS006 |
USB data cable |
BB-AS007 |
USB OTG cable |
BB-AS008 |
Omni-directional antenna 700Mhz to 2700 MHz |
BB-AS009 |
Capacitive pen |
BB-AS010 |
USB disk |
BB-AS011 |
Transmitter power adapter |
BB-AS012 |
5m feeder, N type connector |
BB-AS013 |
Omni-directional antenna set* |
BB-AS014 |
Tripod |
BB-AS015 |
Draw-bar box |
Note: Antenna set include below antennas:
5dBi omnidirectional antenna 870Mhz to 960 MHz
5dBi omnidirectional antenna 1710Mhz to 1990 MHz
5dBi omnidirectional antenna 2000Mhz to 2200 MHz
5dBi omnidirectional antenna 2300Mhz to 2400 MHz
5dBi omnidirectional antenna 2500Mhz to 2700 MHz