IoT Scanner

IoT Scanner

NB-IoT/eMTC Scanner

IoT SCANER covers the test and measurements for narrowband IoT (NB-IoT) and enhanced Machine-Type Communication (eMTC) specified by 3GPP for base stations. It is an integrated platform based on all-standard scanner and LPWAN analysis software. As a third-party test solution, IoT SCANER guaranteed the neutrality of test. IoT SCANER overcomes the disadvantages of conventional test solutions that does not support terminal handover. The instrument can measure and test cells deployed standalone, in-band or in guard band. Support switching to cell with strongest signal coverage in real time. Ultra-fast test speed and very high sensitivity make the instrument suitable for a variety of test environments, including road test.

Category: .
  • Support for testing NB-IoT and eMTC
  • Analyze and measure NB-IoT/eMTC base station downlink signal. Report cell frequency point, PCI, RSRP and RSSI. Output cell’s signal strength waveform in time domain and frequency domain
  • Support cell information measurement with independent deployment, in-band deployment and protect band deployment.
  • Measuring speed ≤ 3s (single frequency point)
  • Sensitivity: -130dBm (RSRP)
  • Data interface: network port
  • RF Interface: SMA Female

Product features

2MHz-3GHz spectrum and multi-system demodulation

High-speed measurement for various scenes

Powerful common-frequency capabilities

Efficient SIB decoding

Automatic testing

Uplink time slot interference test

 

Typical applications

Propagation model tuning test

Indoor distribution system emulation test

Frequency check

Network DT optimization test

Operators network coverage comparison analyzing

Interference check

Product features

  • 2MHz-3GHz spectrum and multi-system demodulation
  • High-speed measurement for various scenes
  • Common-frequency cell test capability
  • Efficient SIBs decoding
  • Automatic test
  • Uplink time slot interference test

Typical applications

  • Propagation model tuning
  • Micro base station planing test
  • Frequency check
  • Network DT optimization test
  • Operators network coverage comparison analyzing
  • Interference inspect and eliminate

Performance

FDD/TD-LTE

Measurement mode

P-SCH/S-SCH, RS, and RB

Data mode

RSSI, RS, RQ, CINR, Timing, Cell ID, Cyclic Prefix, CFO, Delay Spread,

Channel bandwidth

1.4 / 3 / 5 / 10 / 15 / 20 MHz

Antenna skills

SISO, MISO, MIMO (4×2)

Measurement rate @20MHz

>40channel/sec

SIB decoding success rate

90% @ CINR > 0 dB

Common-frequency cell test capability

>25 dB

Dynamic range (CINR) @20MHz: P-SCH/S-SCH

-20dB to +40 dB

Dynamic range (CINR) @20MHz: RS

-23 to +40 dB

Test sensitivity: RS RP

-135dBm (RSRP @20MHz)

UMTS [WCDMA/HSPA(+)]

Measurement mode

Top N Pilot

Data mode

lo, Ec/Io, Aggregate Ec/Io, SIR, Rake Finger Count, Time Off- set,
Delay Spread

Channel bandwidth

200kHz / 3.84MHz

Measurement rate

20 channel/sec

SIB decoding rate

200ms/Single Cell

CPICH dynamic test range (Ec/Io)

-21dB

Sensitivity

-110dBm

GSM

Measurement mode

Color Code

Data mode

BSIC, C/I, RSSI

Channel bandwidth

30kHz / 200kHz

Measurement rate

≥80Channel Decodes/sec

SIB decoding rate

20s / 95 Carriers; 30s / 125 Carriers

Dynamic range

+2dB C/I @90% BSIC Detection

Sensitivity

-114dBm

CDMA

Measurement mode

Top N PN

Data mode

Ec, lo, Ec/Io, Aggregate Ec/Io, Pilot Delay, Delay Spread

Channel bandwidth

30kHz / 1.25MHz

Measurement rate

70 channel/sec

Dynamic range

-7dB to -25dB

Sensitivity

-114dB

TD-SCDMA

Measurement mode

Top N DWPTSPCCPCH

Data mode

Channel, Midamble Code, Sync-DL, RSCP, C/I, SIR, ISCP, Ec/ Io, RSSI,

Channel bandwidth

200kHz / 1.28MHz

Measurement rate

30 channel/sec

SIB decoding rate

4s / 9 Carriers

Dynamic range

-15dB

Sensitivity

-110dBm

Power measurement

CW measurement

Measurement rate

>800 Channel/sec

Spectrum measurement

Measuring range

>90dB

Measurement rate

>3G/sec

RF Features

Internal spurious response

-114dBm

Operation level

-15dBm Max

Safety input level

≤ 10 dBm

Frequency accuracy

± 0.05 ppm (GPS Locked ); ± 0.1 ppm (GPS Unlocked)

Physical

Maximum power (+8 to +16 VDC) 

24W

RF operating range: In-Band

-15dBm Max

Temperature range

Operating: 0°C ~ + 50°C; Storage: – 40°C ~ + 85°C

Host data communications interface

LAN

RF input

RF: SMA Female (50Ω); GPS: Male (50Ω) SMB

 

Model

Description

T2627A

LTE scanner(include TD-LTE FDD-LTE)

TSPS-AS010

GSM license

TSPS-AS011

CDMA / EVDO license

TSPS-AS012

TD-SCDMA license

TSPS-AS01

WCDMA license

Accessories Model

Description

TSPS-AS001

RF omnidirectional antenna 700MHz to 2700 MHz

TSPS-AS002

GPS antenna

TSPS-AS003

Data Cable (3m)

TSPS-AS007

Portable box

TSPS-AS008

COEAG USB license

TSPS-AS009

Power adapter

TSPS-S001

Data collecting and analyzing software

TSPS-S002

Analyzing software of operators network coverage comparison

TSPS-S003

Uplink time slot interference test function

TSPS-H001

Automatic test model

TSPS-H002

Uplink time slot interference test antenna