Bench-top Signal Generator

Bench-top Signal Generator

Bench-top Signal Generator 

T3267E is applicable to research and development, production testing, and electronic countermeasures in various fields such as teaching, wireless monitoring, mobile communication, aerospace, national defense and military industry, etc. It based on the high-performance platform and can meet most of the signal simulation requirements and provide customized signal services.
Category: .
  • Frequency range: 10MHz to 6GHz
  • Power coverage: -110 to +14dBm
  • Wide Bandwidth I/Q Modulation;
  • Full-mode communication standard signal:GSM/ EDGE/TD-SCDMA/WCDMA/TD-LTE/FDD-LTE/NB-IoT/ LoRa/5GNR;
  • Abundant general digital modulation:BPSk/QPSk/OQP Sk/8PSk/16QAM/32QAM/64QAM/128QAM/256QAM/MSk/
    FSk,and output linear/logarithmic scanning,users can configure different modulation modes and symbol rates;
  • Pulse modulation function;
  • Analog Modulation Function: AM/PM/FM;
Signal Modulation

• Analog Modulation

Analog modulation is a change to a characteristic of a periodic or non-periodic signal in order to convey information. G6 can generate a variety of analog signals such as AMFMPM.

• Digital Modulation

Digital modulation is an important signal modulation method for modern telecommunications. It has better anti-interference ability and safety. G6 can output a variety of digital modulated signals.

• Wireless Communication Standard Modulation

G6 supports modulation of signals based on mainstream wireless communication standards. It not only includes 2G/3G/4G mobile communication standards, but also supports IoT signal standards such as LoRa and NB-IoT. The release of WiFi and Bluetooth signal modulation functions is also planned.

• Pulse Modulation

Digital modulation is an important signal modulation method for modern telecommunications. It has better antiinterference ability and safety. G6 can output a variety of digital modulated signals.

• ARB Function

ARB function allows users to transmit customized baseband data. Supports IQ data in .txt and .mat formats. Users need to set the data length and signal sampling rate according to the IQ data file.

• Sweep Mode

The G6 has a frequency sweep function. In this function, engineers can configure parameters such as start and stop frequency, frequency stepping, sweep power, and scan speed.

Performance Advntage

• Dynamic Range

The dynamic range of the signal source is the power difference between the maximum and minimum signals that can be output. The dynamic range of the G6 is as large as -100dBm to +10dBm.

• Phase Noise

Phase noise is an important indicator of the performance of a signal source. It refers to the ratio of the signal power in the 1 Hz bandwidth at the signal center frequency offset of 10 kHz to the total power of the signal. The phase noise of the G6 is very good, at -105dBc/Hz.

• 10MHz Reference Signal

G6 has a physical 10MHz reference signal port (SMA). Engineer can choose to use the built-in 10MHz clock signal and send it out, or receive and synchronize clock signals from other devices.

Typical applications

Laboratory radio frequency testing

G6 covers 10MHz to 6GHz wireless radio frequency communication range with full range 10KHz phase noise better than -110dBc, Hz (typical value) which allow G6 replace LO. G6 also supports testing of intermodulation distortion on amplifier, mixer and receiver. By using with spectrum analyzer, G6 is able to complete broadband and frequency response performance testing for antenna, amplifier, attenuator etc.

Manufacturing testing

G6 is able to simulating GSM, EDGE, CDMA, TD-SCDMA, WCDMA, CDMA2000, TD-LTE, FDD-LTE, NB-IoT, and LoRa standard base station signals to cooperate with production and calibration of UE, chips. By combining G6 Vector Signal Generator Module with A6 Vector Signal Analyzer module, it provides base station consistency and function testing.

Educational practices

By combining G6 signal generator with A6 vector signal analyzer, it also provides RF micro-wave device testing demonstration to reduce the complexity of professional teaching. G6 has the ability to produce all standard uplink and downlink signals and digital modulation signals in any chip rate to satisfy professional education practices.

  • Laboratory RF test
  • Manufacturing application test
  • Teaching application test

Technical

Frequency Range

10MHz to 6GHz

Frequency Resolution

0.1Hz

Frequency-temperature Stability

±1ppm @0 – 50℃

Initial Frequency Accuracy

±0.5ppm

Amplitude Range

-110 to +14dBm

Amplitude Solution

0.1dB

Amplitude Accuracy

±0.75dB@Lev>=-80dBm,;±1.5dB@Lev<-80dBm

Harmonic

≤-30dBc (+10dBm)

Spurious

≤-50dBc

SSB Phase Noise

≤-105dBc/Hz@10kHz(3-6GHz); ≤-109dBc/Hz@10kHz(≤3GHz)

Modulation bandwidth

20MHzcan scale to 100MHz

Modulation Type

I/Q, Pulse

Pulse Modulation Parameters

pulse width: 10ns to 40s, repetition cycle: 10us to 40s

Universal Digital Modulation Type

BPSK, QPSK, OQPSK, 8PSK, MSK, FSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM

Analog modulation standard

AM、FM、PM、DSB、USB、LSB

Mobile Communication Standard

GSM, EDGE, CDMA, TD-SCDMA, WCDMA, CDMA2k, TD-LTE, FDD-LTE, NB-IoT, LoRa

Supported Channel(LTE)

PSS, SSS, CSRS, PBCH, PCFICH, PHICH, PDCCH, PDSCH, PUSCH, PUCCH,  PRACH and SRS

EVM

≤2%rms

Frequency Error

Better than ±10Hz

Phase Error

Better than ±3°

Waveform Quality ρ

>0.9999

Channel

Single or Dual

General

OS for Software

Windows 10, Windows 7

Connect interface

RF output: N-type, 50 Ω
PC connect:USB type-C
Power connect: DC12V

Temperature

Opearting: 0°C to 50°C
Storage: -20°C to 70°C

Dimension and weight

456×434×271(mm), 15kg

Model

Description

G6

Bench-top Vector Signal Generator

Accessories

Description

MTX-AS001

power adapter

MTX-AS002

Data cable

Options

Description

MTX-S001

GSM License

MTX-S002

WCDMA License

MTX-S003

TDD-LTE License

MTX-S004

FDD-LTE License

MTX-S005

NB-IoT License

MTX-S006

LoRa License

MTX-S007

TD-SCDMA License

MTX-S008

Custom Digital Modulation License

MTX-S009

ARB License

MTX-S0010

Pulse Modulation License

MTX-S0011

Analog Modulation License

MTX-S0012

Sweep Mode License

MTX-S0013

LSB\USB\Two Tone License

MTX-S0014

5GNR License

Transcom
T3267E
Keysight
N51828

Frequency range10MHz ~ 6GHz9kHz-6GHz
Frequency resolution0.001Hz
0.001Hz
Power range-120dBm - +25dBm
-144dBm - +30dBm
Power step0.01dB
0.01dB
Power accuracy1 MHz ≤ f ≤ 3 GHz;< 0.5 dB
3 GHz < f ≤ 12.75 GHz;< 0.9 dB
±0.15dB
Phase noise
Condition: shift 20kHz
f = 1 GHz;< -126dBc/Hz
f = 2 GHz;< -120dBc/Hz
f = 10 GHz;< -106dBc/Hz
5 MHz - < 250 MHz –129 (–133)
250 MHz –140 (–143)
500 MHz –135 (–139)
1 GHz –131 (–134)
2 GHz –124 (–127)
3 GHz –123 (–127)
4 GHz –118 (–122)
6 GHz –116 (–121)
HarmonicAmplitude≤ 8dBm,CW mode;< -30dBc
9 kHz - 4 GHz: < –35 dBc 4 - 6 GHz:< –53 dBc(Typical)
Nonharmonic f ≤ 1500 MHz;< –76dBc
1500 MHz < f ≤ 3000 MHz;< –70dBc
3000 MHz < f ≤ 6000 MHz;< –64dBc
6000 MHz < f ≤ 12.75GHz;< –58dBc
12 GHz < f ≤ 20GHz:< –56dBc
20 GHz < f ≤ 40GHz:< –50dBc
9 kHz - < 5 MHz :–65(nominal)
5 - < 250 MHz :–75
250 - < 750 MHz :–87
750 MHz - < 1.5 GHz :–87
1.5 - < 3.0 GHz :–81
3 - 6 GHz :–75
Wireless communication standardGSM/EDGE/TD-SCDMA/WCDMA/TD-LTE/FDD-LTE/NB-IoT/LoRa/5GNR
GSM/EDGE/CDMA/CDMA2000/TD-SCDMA/WCDMA/TD-LTE/FDD-LTE/NB-IoT/LoRa/5GNR
Reference10MHz、1000MHz
10MHz
Analog modulationAM、FM、PM
AM、FM、PM
EVM
≤ 2%rms (≤ 20MHz)、≤ 3%rms (≤ 100MHz)、 ≤ 6%rms (≤ 170MHz)
≤1.9%